HY-TTC 30XSH – Safety Certified I/O Module

 HY-TTC 30XSH, a member of the HY-TTC 30X family, is certified by TÜV Nord according to the EN 13849 standard and fulfills Performance Level c (PL c) requirements. Just as the other family members this certified unit must be used in combination with a master module. For safe communication the standardized CANopen Safety protocol is applicable since compliance to the European standard EN 50325-5 for CANopen Safety is provided.

With this HY TTC 30XSH module, the effort for extending an existing safety critical control system can be reduced to a minimum as it does not have to be modified or recertified. As a result, manufacturers who need to add a new work function to a machine will strongly benefit from the use of HY-TTC 30XSH.

Key Benefits

  • EN ISO 13849 (PL c) certified
  • Easy integration and usage
  • CANopen Safety compliant
  • 30 I/Os with multiple configuration options per pin
  • Small form factor
  • Automotive style housing suited for rough operating conditions

Overview IO-Modules

ProductCPUNumber I/Os
(Max. Iout=2...4A)
Field Bus /
Interfaces
Safety Certifcation /
SIL Level
Programming
Support
HY-TTC 48XS16/32 bit,
80 MHz
28 inputs (analog & digital), 20 outputs (8 x PWM)1 x CANEN ISO 13849 PL dSlave software preinstalled –
attached to a master
controller via CANopen
Safety as slave unit
HY-TTC 48X16/32 bit,
80 MHz
28 inputs (analog & digital), 20 outputs (8 x PWM)1 x CANSlave software preinstalled –
attached to a master
controller via CANopen
as slave unit
HY-TTC 36X16/32 bit,
80 MHz
24 inputs (analog & digital), 16 outputs (4 x PWM)1 x CANSlave software preinstalled –
attached to a master
controller via CANopen
as slave unit
HY-TTC 30XH16/32 bit,
80 MHz
14 inputs (analog & timer), 16 outputs (analog, digital,
voltage, PVG and 8 x PWM,
6 with current feedback)
1 x CANSlave software preinstalled –
attached to a master
controller via CANopen
as slave unit
HY-TTC 30XSH16/32 bit,
80 MHz
14 inputs (analog & timer), 16 outputs (analog, digital,
voltage, PVG and 8 x PWM,
6 with current feedback)
1 x CANEN ISO 13849 PL cSlave software preinstalled –
attached to a master
controller via CANopen
as slave unit
HY-TTC 30XO16/32 bit,
80 MHz
16 inputs (analog & timer), 14 outputs (analog, digital,
voltage, PVG)
1 x CANSlave software preinstalled –
attached to a master
controller via CANopen
as slave unit
HY-TTC 30XI16/32 bit,
80 MHz
26 inputs (analog & timer),
4 outputs (4 x PWM, 2 with
current feedback)
1 x CANSlave software preinstalled –
attached to a master
controller via CANopen
as slave unit