Consulting Packages

Packages

Hazard and Risk Analysis

This consultation package is intended for all manufacturers who have to guarantee safety-relevant functions in all aspects of mobile machinery. According to EN ISO 13849 a risk reduction strategy needs to be executed and a risk assessment shall be first performed.

Objectives: Consulting in creating the hazard and risk analysis for a specific customer application

Prerequisites:

  • Basic knowledge of machine safety
  • Basic knowledge of functional safety
  • Knowledge of the machine limits, functions and use cases
  • Availability of User / Operating Manual of machine under investigation
  • Required participants from your side:
    • Representative of technical department (e. g. department head, mechanical engineer, electronic engineer, …)
    • Representative of service department
    • Person with work experience with the machine under investigation

Contents:

  • Understanding the basics of risk assessment according to ISO 12100
  • Providing templates for risk assessment procedure
  • Moderating execution of risk assessment based on ISO 12100
  • Supporting the creation of documentation of results of risk assessment 

Seminar venue: Consultation should take place at your company location

Duration & Pricing

Duration: 5 days (3 days on-site, 2 days preparation and wrap-up)

 € 5,225.- for seminar at your company location (costs for travel, travel time, overnight stay and external costs, e. g. purchasing of relevant C standards, … not included)

To top

Packages

Practical Safety Consulting

This consultation package is intended for all manufacturers who have to guarantee safety-relevant functions in all aspects of mobile machinery.

Objectives: Consulting to select appropriate system architectures, sensors and actuators to fulfill the safety requirements of a specific machine according to EN ISO 13849

Prerequisites:

  • Integration of TTControl products
  • Availability of hazard and risk analysis
  • Availability of required safety functions and required performance levels

Contents:

  • Introducing the requirements of the current standards (EN ISO 13849-1)
  • Introducing the Sistema software tool of IFA
  • Consulting in the definition of the best fitting system architecture of safety functions according to its required performance level
  • Consulting in the selection of appropriate sensors to achieve the required performance
  • Consulting in the creation of the model of safety functions and its architecture in Sistema
  • Consulting in the verification if the achieved performance level equals to the required performance level
  • Consulting to improve the achieved performance level of an already designed safety function

We can organize the consultations for you in the following locations:

  • at your company location
  • at the TTControl offices (Vienna, Brixen) or at HYDAC

Duration & Pricing

Duration: Minimum 3 days

Please contact TTControl (support@ttcontrol.com)

External costs not included e.g. purchasing of relevant C norms, max. number of participants: 6; € 165.- for each additional participant, 

Costs for travel, travel time and overnight stay will be added for consultations at your company headquarters

To top

Packages

HMI Specification

This consultation package is intended for all manufacturers who want to integrate a HY-eVision² into their system.

Objectives: Consulting in creation of a complete specification of HMI which is the basis of an efficient, cost effective and timely project execution

Prerequisites: Integration of TTControl visualization units

Contents:

  • Understanding the different development steps of an HMI development
  • Understanding the do's and dont's of an HMI development
  • Understanding the features and capabilities of HY-eVision² units
  • Understanding the different operating possibilities, e. g.
    • Keys
    • Touch
    • External keypads or encoders
  • Identifying the required HMI features for the specific application, e. g. 
    • Parameter management
    • Error management
    • USB feature
    • PDF feature
  • Consulting in creation of a specification document for the HMI development
  • Optionally we can provide contacts to graphical design companies able to create custom specific designs for your visualization pages

We can organize the consultations for you in the following locations:

  • at your company location
  • at the TTControl offices (Vienna, Brixen) or at HYDAC

Duration & Pricing

Duration: 5 days

€ 5,500.- (max. number of participants: 6; € 165.- for each additional participant, excluded external costs of HMI design companies)

€ 6,050.- for consultations at your company location (costs for travel, travel time and overnight stay not included)

To top

Packages

Electrical Commissioning

This consultation package is intended for all manufacturers who want to integrate a specific TTControl ECU or display into their system.

Objectives: Receiving official confirmation from TTControl that the electrical connections to TTControl ECUs and/or displays is conform to TTControls’ user manuals and specifications

Prerequisites:

  • Integration of TTControl products
  • Providing electrical schematics of vehicle installation
  • Providing datasheets of sensors, actuators and controllers connected to TTControl ECUs and/or displays
  • Availability of machine under investigation with all optional configurations available

Contents:

  • Technical analysis of compatibility of selected sensors and actuators connected to TTControl ECUs (analysis of datasheets)
  • Technical analysis of electrical schematics
  • Technical analysis of CAN architecture
  • Electrical verification on the vehicle of
    • Sensors
    • Actuators (e. g. current drain, switch off energy, …)
    • CAN 
      • Cabling harness (termination resistances, …)
      • Bus load
      • Error frames

Seminar venue: The electrical commissioning takes place at your company headquarter

Duration & Pricing

Duration: Minimum 5 days (≥ 2 days on-site, ≥ 3 days preparation and wrap-up)

Please contact TTControl (support@ttcontrol.com)

Costs for travel, travel time and overnight stay not included

To top

Packages

Electromagnetic Compatibility (EMC) Consultations

This consultation package is intended for all manufacturers who want to integrate a specific TTControl ECU or display into their system.

Objectives: Supporting you in terms of EMC test planning and execution at your preferred EMC test laboratory

Prerequisites: Integration of TTControl products

Contents:

  • Consulting during the phase of EMC test planning
  • Consulting during the execution of EMC test at your preferred EMC test laboratory
  • Consulting to improve EMC of your vehicle

Seminar venue: The consultation takes place at your company location and/or your preferred EMC test laboratory

Duration & Pricing

Duration: Minimum 5 days (≥ 2 days on-site, ≥ 3 days preparation and wrap-up)

Please contact TTControl (support@ttcontrol.com)

Costs for travel, travel time and overnight stay and external costs not included - e.g. purchasing of relevant EMC standards, ...)

To top

Packages

Enhancement of Control Systems

This consultation package is intended for all manufacturers who face problems during the execution of control systems.

Objectives: Consulting to improve controller operation for a specific customer application

Prerequisites:

  • Principal description of the machine to be controlled
  • Adequate documentation about the deviation between desired and actual system behavior.
  • Application runs on TTControl products
  • Required participants from your side:
    • Representative of technical department (e. g. department head, mechanical engineer, electronic engineer, …)
    • Person with work experience with the machine under investigation

Contents:

  • Analysis of the control system
  • Suggestions for improved control behavior (re-parameterization or restructuring)
  • pre-commissioning on the controlled system.

Consultation venue: Consultation should take place at your company location or technical department

Duration & Pricing

Duration: minimum 5 days, depending on the scope (3 days on-site, 2 days preparation and wrap-up)

Please contact TTControl (support@ttcontrol.com)

Costs for travel, travel time and overnight stay not included

To top

Packages

Complex Control Design

This consultation package is intended for all manufacturers who face challenges in designing of complex control tasks.

Objectives: Consulting in controller design for a specific customer application

Prerequisites:

  • Principal description of the machine to be controlled
  • Clear Goal to be achieved by the control system recorded in a requirements document.
  • Availability of operating manuals or construction details of machine to be controlled
  • Application intended to run on TTControl products
  • Required participants from your side:
    • Representative of technical department (e. g. department head, mechanical engineer, electronic engineer, …)
    • Person with work experience with the machine under investigation

Contents:

  • Analysis and modeling of the control system
  • Parameterization of the model based on measurement results
  • Design of suitable sensor architecture
  • Controller design (structure, parameterization)
  • Operation of machine to be controlled (implementation, commissioning) 
  • Optimization of overall system behavior

Consultation venue: Consultation should take place at your company location or technical department

Duration & Pricing

Duration: minimum 15 days, depending on the scope (10 days on-site, 5 days preparation and wrap-up)

Please contact TTControl (support@ttcontrol.com)

Costs for travel, travel time overnight stay not included

To top